Effect of some Structural Factors of Protective Clothing Fabrics for Bedsore Patients

The research aims to achieve the best functional Properties of the fabrics of bed sore patients' clothes, to reach best type of warp thread material and the best textile structure that achieves best functional properties of fabrics produced in question, and suitable fabrics were produced for this purpose by fixing the specifications of warp yarns for all the fabrics produced under the research of the number(30/2 100% cotton), and by using 3 types of weft fiber(100% linen, No16/1,tencil No 20/1,modal No 30/1. With the coverage coefficient(14), with three different textile structure Stain 5 by adding 3 markers - crepe by the method of crawling and rotating - decorative fabric(connective), and some initial preparations were made on the produced fabrics in question, and a series of laboratory tests were followed(strength Tensile, elongation, absorption time(w), crease angle, air permeability, smoothness of texture, resistance to bacteria), in addition to applying multi-axis radar method to express the quality assessment You There is a mechanism for the fabrics produced under research, and the study concluded that the sample produced with the raw warp thread is leaned and the textile composition is crepe by the method of crawling and rotation is the best for some different performance properties by quality factor(85.6%), while the sample produced with raw warp thread is linen and the textile composition Stain 5 by adding 3 markers. It is the lowest in terms of performance properties with a quality factor (43.6%),